nVessel

1A.

Alternate protective lining:
Phenolic epoxy resin, Flame spray copper, 3lbs./Sq.Ft. Copper lining, Hot dip galvanizing, other.

1B.

Alternate vessel construction:
Stainless Steel Type 304 or 316L, 90/10 Copper-Nickel, Copper-Silicon, other.

1C.

Alternate working pressure:
Please specify

nHeating Coil

2. Double wall tubing with a leak detection port
3. Alternate tubing material please specify:
   (Stainless Steel, 90/10 Copper-Nickel, Admiralty)
4. Fabricated head constructed from:
   (Stainless Steel, Copper Alloy)

nGeneral

5. Skid mounting on heavy duty all welded I Beam
6. Type 304 stainless steel protective jacket, please specify if painted

nOperating Controls

7. Boiler water control valve can be factory selected and sized, but shipped loose for in the field installation by others.
8. Single solenoid safety system closes the boiler water supply to the heating coil should the water temperature in the tank reach the hi-limit set point. Requires 120 volt 5 amp electrical service.
9. A double solenoid safety system dumps over heated water in the storage tank to drain in addition to closing the boiler water supply to the heating coil. Requires 120 volt 5 amp electrical service.
10. Intra-tank circulation pump package continuously circulates water within the tank in order to reduce stratification. All bronze pump rated 1/12 HP 120 volt 1 phase.
11. Dial water thermometer and pressure gauge factory installed in the tank.
12. Anticipator control system forces incoming cold water over the control valve sensing bulb in order to begin heating water immediately.
13. Factory wrapped and baffled heating coil with integral pump package.
14. Dual energy package provides operational flexibility by utilizing a secondary power source.