Standard Equipment
Optional Equipment
Outline Dimensions
KW, GPM,  Amperage
Sizing Formulas
Metric Conversions
Ordering Information
Submittal Specs
Operating Manual
CR Model Optional Equipment
Back to CR Intro

NOTE: Other optional features are available, please consult factory if required.

nVessel

 nGeneral

  1. Vertical configuration with heavy duty support base.
  2. Wall hung construction for (horizontal, vertical) off the floor installation.
  1. Alternate material construction:  Stainless Steel Type 304 or 316L, 90/10 Copper-Nickel, Copper-Silicon, Titanium, Carbon Steel, other.

nElectrical

 

  1. NEMA 4 watertight enclosure for outdoor/wet locations.
  2. Explosion resistant enclosure for hazardous locations.
  3. Built-in circuit breaker (with or without shunt trip) or a built-in non-fused On/Off disconnect switch.
  4. Alternate element sheath material: Incoloy, Stainless Steel, Inconel, Monel, Steel, Teflon, Titanium, other.
  5. Specialized heating element construction including: Special watt density rating, passivation, electropolishing, or any other feature required to meet the needs of your application.
  1. Digital display electronic temperature controller.
  2. SCR "zero fired" power control package for 0-100% proportional control of the heating element.
  3. Dial thermometer and pressure gauge.
  4. Status indicating lamp(s).
  5. Audible alarm system.
  6. RS485 communication port for remote operation of the temperature controller.
 

Hot Water Heaters Home | Hot Water Heaters Selection Guide | Rep Listing | Contact Hubbell Heaters

Low Capacity Electric Water Heaters | High Capacity Electric Water Heaters | Special Purpose Water Heaters | Steam Fired Water Heaters | Indirect / Direct Fired Water Heaters | Heating Elements & Coils

Hubbell HeaterswThe Electric Heater CompanywP.O.Box 288 wStratford, CT 06615-0288
Phone: (203) 378-2659
wFax:(203) 378-3593wEmail: info@hubbellheaters.com