Water Heaters
 

MODEL EMV WATER HEATER SPECIFICATIONS

 

Tank: Hydrastone Cement Lined Steel
Storage Capacity: 120 Gallons (see note)
Voltages 120 thru 480 Volt
Phase: 1 or 3
Cold Water Inlet Size 1 1/2" Female NPT
Tepid Water Outlet Size: 1 1/4" Female NPT
Drain Size: 3/4" Hose Connection
Relief Valve Size: 3/4" Hose Connection
Relief Valve Type: T&P, 210 F, 150 psi
Thermostat Range: 100 - 180 F
Piping: Copper Tubing:
Mixing Valve Cv: 10.0
Pressure Drop at 20 GPM: 4 psi
Minimum Supply Pressure 30 psi
Hi-Limit: 190 F
Design WP: 150 psi
Design TP: 300 psi
Elements: Copper Sheathed
Insulation: 3" Polyurethane Foam

Tank Warranty:

Standard:
Optional:

 

5 Year Non Pro-Rated
10 Year Non Pro-Rated

Electrical Warranty: 1 Year
Jacket: High Impact Colorized Composite
Color: Brown and Tan
Note: Alternative storage capcities are available for smaller or larger requirements. Please consult factory for sizing requirements.

FORMULAS TO SOLVE FOR:


Watts  Recovery Rating in GPH 50° - 170° F   Amperage
Ratings Single Phase
Voltages		  
120 V 208 V 240 V 277 V 480 V
1500 5.1 13 7 6 5 N.A.
3000 10.2 N.A. 14 13 11 6
4000 13.6 N.A. 19 17 14 8
4500 15.3 N.A. 22 19 16 9
6000 20.5 N.A. 29 25 22 13

 

 Note: For three phase rating please reference hubbell Model SE water heater for kw selection.
 

Hot Water Heaters Home | Hot Water Heaters Selection Guide | Rep Listing | Contact Hubbell Heaters | Low Capacity Electric Water Heaters | High Capacity Electric Water Heaters | Special Purpose Water Heaters | Steam Fired Water Heaters | Indirect / Direct Fired Water Heaters | Heating Elements & Coils

Hubbell Heaters w The Electric Heater Company wP.O.Box 288 w Stratford, CT 06615-0288
Phone: (203) 378-2659 w Fax:(203) 378-3593 w Email: info@hubbellheaters.com