Water Heaters
 
Water Heater Features

nHeavy Duty Construction

  • All stainless steel tank construction does not
    require an internal lining
  • ASME Section VIII stamped construction
    provides for extended tank life
  • Entire exterior is 304 brushed stainless steel
    for improved appearance and longevity
  • Gasketed front cover minimizes water intrusion
    to increase service life

nAdvanced Design

  • Advanced electronic temperature control with
    digital display confirms at a glance proper
    operation and temperature setting
  • Visual indication of fault conditions provides
    instant feedback
  • Electronic leak detection system notifies user in
    the event of an internal water leak
  • Factory packaged resettable circuit breakers
    for internal over current protection save time
    and money compared to one shot fuses
  • A bronze body (not cast iron) pressure reducing
    valve is factory supplied with each booster.
  • Designed for ease of service, no electrical
    component needs to be removed to replace
    any other part

nReliable

  • Overall dimensions and connection locations
    are compatible with other popular brands to
    facilitate direct replacement without modification
    to the existing plumbing.
  • Molded rigid polyurethane foam insulation
    minimizes tank heat loss for maximum operating
    efficiency and reduced operating costs

 

Hubbell Electric Hot Water Heater Model J

  • Screw plug elements with O-ring gasket reduce leakage problems associated with less reliable and more difficult to service flange type heating elements.
  • Full ten (10) year (non pro-rated) tank warranty


Hot Water Heaters by Hubbell

A Long Lasting Booster Heater

The Hubbell J model is the longest lasting booster heater available because it utilizes a heavy duty ASME Section VIII designed, constructed and stamped all stainless steel tank which does not require an internal tank lining. Other manufacturers use a non ASME steel tank with an internal lining which is easily eroded in high temperature water and eventually leaves the bare steel tank exposed to the corrosive effects of water. Once this occurs it is only a short time before a steel tank will begin to rust, leak, and need replacement. Hubbell did not stop at improving just the tank design. For improved appearance and longevity the Hubbell booster comes standard with a brushed 304 stainless steel outer jacket

 and base which is impervious to the corrosive effects of water and looks great in your kitchen. The Hubbell booster is also equipped as standard with the advanced functionality of an electronic temperature controller to provide accurate, reliable and energy efficient operation while simplifying service work. The Hubbell booster’s polyurethane foam insulation also improves operating efficiency and reduces the cost of operation. When you specify and install a Hubbell booster heater, you will have confidence in knowing that the owner will be provided with a long lasting and trouble-free source for 180°F water.

 
 

Hot Water Heaters Home | Hot Water Heaters Selection Guide | Rep Listing | Contact Hubbell Heaters | Low Capacity Electric Water Heaters | High Capacity Electric Water Heaters | Special Purpose Water Heaters | Steam Fired Water Heaters | Indirect / Direct Fired Water Heaters | Heating Elements & Coils

Hubbell HeaterswThe Electric Heater CompanywP.O.Box 288 wStratford, CT 06615-0288
Phone: (203) 378-2659wFax:(203) 378-3593wEmail: clabella@hubbellheaters.com