Water Heaters
 
OPTIONAL EQUIPMENT  

 

 

1. Floor Mounting Hardware: Deck mounting legs are available for shipboard applications

5. Nickel Plated Die-Cast Leg: For an all stainless steel look these legs can be pro-vided in lieu of the standard black plastic legs.

2. Shock Absorber: Reduce the harmful pressures resulting from quick closing dishwasher solenoid valves by installing ashock absorber between the booster and the dishwasher.

6. Water Treatment System: Provide superior mineral scale prevention and corrosion control by feeding a special blend of scale control compounds into the hot water stream before the booster. The in-line system includes a clear cartridge housing to allow an operator to view the cartridge and determine when it needs replacement without the need to open the syste
3. Slide Brackets: Available for the J6 model only, these brackets allow for mounting the booster heater under a counter. See slide bracket diagram for details. 7. Alternate Voltage: Voltages other than those shown here are available, including 380/415/440 volt and others. Consult factory for details.
4. Tamper Resistant Package: For prison and other secure facilities a tamper resistant package is available.  
 
Electric Hot Water Heater Model J

 

 

Hot Water Heaters Home | Hot Water Heaters Selection Guide | Rep Listing | Contact Hubbell Heaters | Low Capacity Electric Water Heaters | High Capacity Electric Water Heaters | Special Purpose Water Heaters | Steam Fired Water Heaters | Indirect / Direct Fired Water Heaters | Heating Elements & Coils

Hubbell HeaterswThe Electric Heater CompanywP.O.Box 288 wStratford, CT 06615-0288
Phone: (203) 378-2659
wFax:(203) 378-3593wEmail: clabella@hubbellheaters.com