The
heating elements shall be high quality copper sheath electric
immersion type. The marine water heater shall be dual element
design
consisting of an upper and lower element rated at __________
watts each (Note: 6, 10, & 20 gallon models have single
lower element only). Dual element water heaters are interlock
wired
for non-simultaneous
element operation (Optional Specification: elements
to be wired for simultaneous operation. ) The heater shall
be designed to operate at __________ volts, single phase
(Optional Specification: wired for three phase
open delta operation. )
In addition, the water heater shall be supplied with the following options:
• Option: __________
• Option: __________
• Option: __________
The water heater manufacturer shall warranty all electrical components against
defects in workmanship and material for a period of one (1) year from date of
start-up, and the pressure vessel for a full five (5) years Non Pro Rated (Optional
Specification: Full ten (10) years Non Pro-Rated Tank Warranty ) from date of
start-up, provided that the unit is started within three (3) months of date of
shipment and installed and operated within the scope of the tank design and operating
capability. Each water heater shall be shipped with a complete set of installation
and operating instructions including spare parts list and approved drawings.
Continuing research results in product improvement; therefore
these specifications are subject to change without notice. For
the most updated information, consult the factory.
|
