Water Heaters
 

Optional Equipment  

1. Immersion thermostat specify 100-180 oF or 30-110 oF temperature range.
2. Immersion adjustable 100-240 oF safety hi-limit cut out with manual reset.
3. Secondary heating capability provided by a tank inserted heat exchanger constructed from single wall (Optional: double wall) copper fin tube. Specify 20 or 40 Sq. Ft. heating surface.
4. Combination temperature and pressure gauge; 2 1/2" dial, 70-250 oF, 0-200 psi — factory installed.

 5. 1 1/2" Male NPT inlet and outlet water connections.
6. Solid Type 316L stainless steel or copper-silicon alloy tank for extended tank life.
7. Three phase open delta wiring (must be simultaneous operation).
8. Heating elements wired for simultaneous operation.
9. Full 10 Year Non Pro-Rated tank warranty.
10. Special construction including hazardous location, NEMA 4 and other features available. Please consult factory.

 

Hot Water Heaters Home | Hot Water Heaters Selection Guide | Rep Listing | Contact Hubbell Heaters | Low Capacity Electric Water Heaters | High Capacity Electric Water Heaters | Special Purpose Water Heaters | Steam Fired Water Heaters | Indirect / Direct Fired Water Heaters | Heating Elements & Coils

Hubbell HeaterswThe Electric Heater CompanywP.O.Box 288 wStratford, CT 06615-0288
Phone: (203) 378-2659wFax:(203) 378-3593wEmail: info@hubbellheaters.com