1. Tube Sheet Data
Outside Diameter __________
Thickness __________
Material __________
Number of Tube holes
in the tube sheet __________
Does the tube sheet have
Bolt Holes in it?
__________ Yes __________ No
If Yes:
# of bolt holes__________
Dia. of bolt holes__________
Bolt circle__________
Do the bolt holes straddle
the centerline?
__________ Yes __________ No
2. Diameter of the neck nozzle on the tank.
Outside Diameter __________
Inside Diameter __________
(Include thickness of neck lining, if any)
Circumference Of Neck __________
3. Immersion length of tubes “B” __________
Heating surface area
in Sq. Ft. (if known) __________
Tank Type:
__________ Vertical __________ Horizontal
Tank dimensions:
Diameter __________
Height __________
Pull space __________
maximum length __________
4. Tube Outside
Diameter __________
Material __________
Gauge __________
BWG, Type:
__________ Single Wall
__________ Double Wall
Design Pressure __________
Design Temperature __________
Number of passes __________
Number of tube supports __________
__________ Full __________ Half type,
Distance to each tube support __________
Material __________
O.D. of supports __________
Thickness __________
Recovery rated to
heat __________ GPH
from __________ °F
to __________ °F
When supplied with the following
heat source:
__________ Steam at __________ psig
__________ Lbs./Hour
Steam Consumption
__________ Boiler Water at __________ GPM
from __________ °F
to __________ °F
__________ HTHW at __________ GPM
from __________ °F
to __________ °F
|
