SE KW Selection Chart

Standard Rating KW	BTU/HR	GPH Recover at 100^oF Rise	Amperage Ratings At Various Voltages
			Single Phase			Three Phase
			208V	240V	480V	208V	240V	380V	415V	480V
3	10,236	12	14	13	6	8	7	5	4	4
4	13,648	16	19	17	8	11	10	6	6	5
6	20,472	25	29	25	13	17	15	9	8	7
8	27,296	33	39	33	17	22	19	12	11	10
10	34,120	41	48	42	21	28	24	15	14	12
12	40,944	49	58	50	25	33	29	18	17	15
15	51,180	62	72	63	31	42	36	23	21	18
18	61,416	74	87	75	38	50	43	27	25	22
20	68,240	82	96	83	42	56	48	30	28	24
24	81,888	98	115	100	50	67	58	37	33	29
30	102,360	123	144	125	63	83	72	46	42	36
36	122,832	148	173	150	75	100	87	55	50	43
40	136,480	164	192	167	83	111	96	61	56	48
45	153,540	185	216	188	94	125	108	69	63	54
50	170,600	205	240	208	104	139	120	76	70	60
54	184,248	221	260	225	113	150	130	82	75	65
58	197,896	238	279	242	121	161	140	88	81	70

Notes:

The KW selections above are shown for convenience. A full selection of KW ratings from 1 to 58 KW is available by simply entering the desired KW into the model number.

Units 45 KW and over are supplied with 11/2" Male NPT inlet/outlet connections and immersion hi-limit.




Formulas To Solve For:

Recovery

GPH x_________^oF DT x 0.00244 = KW KW x 410 ÷ GPH = __________ ^oF DT KW x 410 ÷ ^oF DT =__________ GPH *Note:* 1 KW will heat 4.1 GPH at a 100^oF DT

Electrical

KW x 1000 _{÷ 1.73 = Amps 3}_F Volts KW x 1000 _{= Amps 1}_F Volts

Metric Conversion

	Liters x 0.2641 = Gallons Gallons x 3.79 = Liters Gallons x 0.003785 = m³m³ x 264.2 = Gallons 1^oC DT = 1.8^oF DT ^oF = (^oC x 1.8) + 32 ^oC = (^oF - 32) x 0.556 psi x 0.06896 = Bar Bar x 14.5 = psi psi x 6.86 = kPa kPa x 0.1456 = psi Lbs x 0.4536 = Kg Kg x 2.2 = Lbs Watts/Sq.Cm. x 6.4 = Watts/Sq.In. Watts/Sq.In. x 0.155 = Watts/Sq.Cm.

Hot Water Heaters Home | Hot Water Heaters Selection Guide | Rep Listing | Contact Hubbell Heaters

Hubbell HeaterswThe Electric Heater CompanywP.O.Box 288 wStratford, CT 06615-0288
Phone: (203) 378-2659wFax:(203) 378-3593wEmail: info@hubbellheaters.com