n

Vessel

nGeneral

    1A.

Alternate protective lining:
Phenolic epoxy resin, Flame spray copper, 3lbs./Sq.Ft. Copper lining, Hot dip galvanizing, other.

1. Skid mounting on heavy duty all welded I Beam
2. Type 304 stainless steel protective jacket, please specify if painted.
3. Dual energy package provides operational flexibility for electric and (steam or boiler water) power.

    1B.

Alternate vessel construction:
Stainless Steel Type 304 or 316L, 90/10 Copper-Nickel, Copper-Silicon, other.

    1C.

Alternate working pressure:
Please specify

nElectrical

1. NEMA 4 watertight enclosure for outdoor/wet locations.
2. Explosion resistant enclosure for hazardous locations.
3. Built-in circuit breaker (with or without shunt trip) or a built-in non-fused On/Off disconnect switch.
4. Alternate element sheath material (Please Specify: Incoloy, Stainless Steel, other).
5. Specialized heating element construction including: Special watt density rating, passivation, electropolishing, or any other feature required to meet the needs of your application.
6. Factory installed low water cut out device to disengage electrically the heating element(s) in the event of insufficient water in the tank.

7. Dial thermometer and pressure gauge factory installed in the tank.
8. Intra-tank circulation pump package with On/Off switch to continuously circulate water within the tank and thereby reduce stratification. All bronze circulator pump is rated 1/12 HP, 120V, 1 Ph.
9. Status indicating lamp(s).
10. Audible alarm system.
11. Digital display electronic temperature controller.  Please specify with or without RS485 communication port for remote operation of the temperature controller.
12. Building Automation System (BAS) package provides remote operating/alarm capability.