nVessel Construction

1. All welded carbon steel vessel designed and built in strict accordance with the ASME Code Section VIII and stamped, certified, and registered with the National Board of Boiler and Pressure Vessel Inspectors.
2. All internal tank surfaces are lined with a minimum of 5/8" thick Hydrastone cement for superior protection and tank longevity.
3. Designed for 125psi working pressure and hydrostatically tested at 188psi (11/2 times the WP).

nGeneral

1. Heavy duty 2" thick fiberglass blanket insulation covers 100% of the pressure vessel for maximum operating efficiency and minimal standby heat loss.
2. Heavy gauge galvanized steel protective jacket with both top and bottom heads keeps insulation in place and protected to ensure high  operating efficiencies.
3. Heavy duty integrally welded steel supports for floor mounting
4. Full five (5) year Non Pro-Rated tank warranty and one (1) year electrical component warranty.
5. ASME rated combination T&P relief valve set at the vessel working pressure and 210^oF.

nSteam Heating Coil

1. A high quality factory installed 2 pass U-Tube heating coil constructed from 20 gauge 3/4" O.D. single wall copper tubing designed for a maximum working pressure of 150psi
2. All wetted parts including the tube sheet and baffles are non-ferrous for maximum longevity
3. Heavy duty fabricated steel head with threaded NPT steam and condensate connections

nSteam Operating Controls

1. Steam operating controls are factory selected, sized, piped, and tested to ensure reliable operation
2. All steam components are factory plumbed with schedule 40 black iron pipe and ready for steam and condensate connections
3. High quality cast iron pilot operated steam control valve modulates the flow of steam through the heating coil to provide accurate water temperature control
4. Cast iron Y strainer with 20 Mesh screen protects the steam controls and coil from dirt and debris in the steam supply
5. Thermostatic drip trap removes condensate from the steam supply line
6. Heavy duty cast iron float and thermostatic main condensate trap for optimum efficiency
7. Brass vacuum breaker and dial steam pressure gauge installed in the heating coil head