Electric Low Capacity

Light Duty Commercial

Electric cement lined water heater Model E
  • Light Duty
  • 6 - 120 Gallon Capacity
  • Up to 12KW - 1 Phase or 3 Phase

Ceiling Hung Horizontal

Electric horizontal ceiling hung water heater Model HE/HSE
  • Horizontal, Ceiling Hung
  • 20 or 30 Gallon Capacity
  • Up to 20 KW - 1 or 3 Phase

Heat Pump
Hybrid

Hybrid electric heat pump water heater Model PBX
  • Heat Pump Water Heater
  • 40 - 120 Gallon Capacity
  • 1 or 3 Phase

Point-Of-Use Storage

Point-of-use electric water heater Model CE110
  • Point-of-Use
  • 1 Gallon Capacity
  • 1000 or 450 Watts - 1 Phase

Point-Of-Use Tankless

Electric tankless point-of-use water heater Model R
  • Whole House / Point-of-Use
  • Availabe 3 thru 27 KW - 1 Phase

Electric
Booster

Electric booster water heater Model J
  • Booster Heater
  • Provides 180°F water
  • Up to 88 KW - 1 or 3 Phase

Tankless Electric Booster

Electric tankless booster heater Model JTX
  • Tankless Booster Heater
  • Provides 180°F water
  • 11 to 54 KW - 1 or 3 Phase

Heavy Duty Commercial

Commercial heavy duty electric storage water heater Model SE
  • Heavy Duty
  • 6-120 Gallon Capacity
  • Up to 58 KW - 3 Phase

Tankless Commercial

Electric tankless water heater Model TX
  • Tankless Commercial
  • Highly efficient tankless
  • Up to 54 KW - 1 or 3 Phase

Large ASME
Heater

Large capacity electric storage tank water heater Model SH
  • Large Capacity
  • 80-5000 Gallon Capacity
  • All KW ratings - 1 or 3 Phase
     

Commercial Gas Tankless

Gas tankless water heater Model GX
  • High Efficiency Condensing Burner
  • Integrated Pump
  • 200,000 and 250,000 BTUs

Integrated Tank with Tankless

Condensing gas storage tank water heater Model GXT
  • High Efficiency Condensing Burner
  • Hydrastone Cement
  • 200,000 to 250,000 BTUs

DI / RO Gas
Tankless

DI/RO gas fired tankless water heater Model DGX
  • DI/RO Water Heater
  • High Efficiency Condensing Burner
  • 199,950 and 250,000 BTU

Gas Tankless Booster

Condensing gas tankless booster water heater Model JBX
  • Gas Tankless Booster
  • For Commercial Kitchens
  • 250,000 BTU

Gas Storage
Heater

Condensing gas storage tank water heater Model GXT
  • Non Condensing Burner
  • Hydrastone Cement
  • 200,000 to 250,000 BTUs
   

Large ASME
Steam Heater

Steam fired water heater large capacity Model ST
  • Storage Type
  • 80-5000 Gallon Capacity
  • ASME Stamped

Packaged Semi-Instantaneous

Semi-Instantaneous Steam Fired Water Heater Model STX
  • Semi-Instantaneous
  • Space saving design
  • Provides 10,500 GPH

Point-Of-Use
Steam

Storage tank steam fired water heater Model PS
  • Light Duty
  • 80-120 Gallon Capacity
  • For low demand/recovery

High Capacity Instantaneous

Instantaneous steam fired water heater Model F
  • Instantaneous
  • 7 Sq. Ft. of floorspace
  • Up to 120 GPM
     

Semi-Instantaneous Indirect

Indirect fired semi-instantaneous water heater Hubbell Model BWX
  • Semi-Instantaneous
  • Vertical or Horizontal
  • ASME Stamped

Large ASME
Indirect

Indirect fired storage tank water heater Hubbell Model BW
  • Storage Type
  • Vertical or Horizontal
  • 80-5000 Gallon Capacity

Small Capacity Indirect

Indirect fired storage tank water heater model T Transflow
  • Indirect Fired
  • 30-120 Gallon Capacity
  • Utilizes boiler water

Solar

Solar water heater Model SLN
  • Solar Heater
  • Vertical Storage Type
  • 30-120 Gallon Capacity
       

Storage
Tanks

ASME and None ASME storage vessels Hubbell Model StorageTank
  • ASME & Non ASME designs
  • Hydrastone Cement
  • Vertical or Horizontal

Buffer
Tanks

ASME and None ASME storage vessels Hubbell Model BufferTank
  • Carbon Steel Construction
  • Long Warranty
  • ASME Section VIII, Division 1
   
       

Circulation (Instantaneous)

Electric circulation heater Hubbell Model CR
  • Circulation (Instantaneous)
  • Heavy Duty Construction
  • 25-1600 KW - 1 or 3 Phase

Explosion
Resistant

Electric hazardous location water heater Model ER
  • Hazardous Location
  • 10-120 Gallon Capacity
  • Up to 58 KW - 1 or 3 Phase

Industrial Process Heater

Electric process industrial water heater Model V
  • Process Systems & Industrial
  • ASME Stamped
  • Up to 88 KW - 1 or 3 Phase

Emergency Shower Tankless

Electric tankless safety shower water heater Model ETX
  • Tankless Emergency Tepid Water
  • NEMA 4 Standard
  • Up to 88 KW - 1 or 3 Phase

RO / DI Heater Compact

DI/RO electric hot water heater Model HD
  • RO/DI Water Heater
  • Point-of-Use Heater
  • Up to 88 KW - 1 or 3 Phase

RO / DI Heater Storage

DI/RO electric hot water heater Model D
  • RO/DI Water Heater
  • 1-120 Gallon Capacity
  • Up to 88 KW - 1 or 3 Phase

Tepid Water for Emergency Fixtures

Electric safety shower water heater Model EMV
  • Emergency Tepid Water
  • Fully packaged system
  • Integrated mixing valve

Fully Integrated Package

Model Packaged Skid
  • Customized to your specifications
  • Full featured system ready for your application

Light Duty
Electric

Electric water heater for shipboard marine use single phase power Model ME
  • Light Duty
  • 6-120 Gallon Capacity
  • Up to 6 KW - 1 Phase

Large ASME
Electric

Electric water heater for shipboard marine use large capacity Model MSH
  • Large Capacity
  • 80-5000 Gallon Capacity
  • All KW ratings - 1 or 3 Phase

Heavy Duty
Electric

Electric water heater for shipboard marine use three phase power Model MSE
  • Vertical
  • 6-120 Gallon Capacity
  • 1 or 3 Phase - Up to 58 KW

Tankless
Electric

Electric tankless water heater for shipboard marine use model MTX
  • Tankless Marine Heater
  • Provides 180°F water
  • 11 to 54 KW - 1 or 3 Phase

Naval

Naval shipboard marine electric water heater Hubbell Model 177
  • MIL Spec Navy Heaters
  • Comforms to MIL-H-965
  • Shock and EMI protection

Fully Integrated Package

Turn-key hot water system
  • Customized to your specifications
  • Full featured system ready for your application
   

Immersion Heating
Elements

Electric immersion tubular style heaters
  • Immersion Electric Heaters
  • Flanged or Screw Plugs Types
  • All KW ratings - 1 or 3 Phase

Heat Transfer
Coils

Heat exchanger and heating coil water heaters
  • Immersion Heat Transfer Coils
  • U tube type
  • Range of Materials
   
       
Electric High Capacity
Gas Fired
Steam Fired
Indirect
Storage
Special Purpose
Marine
Elements & Exchangers
Resource Center
Electric horizontal ceiling hung water heater Model HE/HSE
Still have questions? Complete this form
*Name:
*Email:
*State /
Province:
*Comment:

Model HE / HSE

Ceiling Hung Horizontal Water Heater

20 or 30 Gallon Capacity, All Voltages Single Phase or Three Phase

Today's design requirements put a premium on floor space for many commercial applications. The Hubbell HE and HSE model water heaters specificallly address the concern of utilization of space by providing a horizontal water heater for installation above a drop ceiling. The integrally welded mounting assemblies are designed for quick and efficient job site installation without the need for cumbersome and expensive structural platforms. This design, in conjunction with the superior characteristics of a Hydrastone cement lined tank, gives you the confidence in knowing that when you specify and install a Hubbell water heater, the owner will be provided with a quality product that is a long lasting and trouble-free source for hot water.

Learn More About Hydrastone Cement Lining

cULUS Listed
  • Space Saving Design

    • Horizontal ceiling hung tank requires minimal clearance and no floor space
    • Simple tie rod installation eliminates expensive and cumbersome mounting shelves
  • Heavy Duty Construction

    • Hydrastone cement lining provides long tank life
    • High impact composite jacket cannot rust or corrode and eliminates damage during transit and installation
  • Reliable

    • Full range of sizes to meet your exact heating needs
    • Immersion adjustable thermostat provides accurate temperature control
    • Full five (5) or ten (10) year Non Pro-Rated tank warranty

Model HE & HSE Water Heater Specifications

Capacities: 20 or 30 Gallons
Orientation: Horizontal
Voltages: 120 thru 600 Volt
Phase: Single or Three Phase
Inlet Size: 3/4" Female NPT
Outlet Size: 3/4" Male NPT
Drain Size: 3/4" GHT
Relief Valve Size: 3/4" Female NPT
Relief Valve Type: T&P, 210°F, 150 psi
Thermostat Range: 100-180°F
Hi-Limit: 190°F
Design WP: 150 psi
Design TP: 300 psi
Elements:
1Φ: Copper Sheathed
3Φ: Incoloy Sheated
Insulation: 2" Polyurethane Foam
Tank Warranty:
Standard: 5 Year Non Pro-Rated
Optional: 10 Year Non Pro-Rated
Electrical Warranty: 1 Year
Jacket: High Impact Colorized Composite
Finish: White with Black Trim

Standard Equipment

  • Four (4) integrally welded factory installed mounting assemblies
  • Magnetic Contactor on HSE model only
  • Commercial grade immersion heating element
  • Immersion thermostat (100-180°F Range)
  • Surface type safety hi-limit cut out with a manual reset button (190°F)
  • ASME temperature and pressure relief valve set at 150psi and 210°F
  • 2" thick Polyurethane foam insulation meets or exceeds the requirements of ANSI/ASHRAE/IESNA 90.1
  • High impact non-corroding colorized composite protective jacket

Outline Dimensions

Outline Dimensions

Dimensional Data

Base Models Storage
Capacity (Gallons)
Dimensional Data (Inches) Dry Weight (Lbs) Wet Weight (Lbs)
Overall Diameter
"A"
Overall Length
"B"
Mounting Dimension
"C"
HE20 HSE20 20 20 37 15 135 301
HE30 HSE30 30 20 45.5 21 165 415
Note: Contractor to supply 3/8" diameter Tie Rod for hanging installation.

KW Selection Chart

Base Models Phase KW Ratings Available
120V 208V   240V   277V*   480V   600V
HE 1 Φ 1.5, 2.0 1.5, 2.0, 3.0, 4.0, 4.5, 5.0, 6.0, N/A, N/A
HSE 3 Φ N/A 2.5, 3.0, 4.0, 5.0, 8.0, 10, 12, 15.0, 20.0
*277 Volt Available in Single Phase Only.
Note: 1 KW will heat 4.1 GPH at a 100°F Rise (40-140°F)

Optional Equipment

  • Drip pan assembly
  • Low range immersion thermostat (30-110°F Range)
  • Ten (10) year Non Pro-Rated tank warranty
  • Larger storage capacity tanks available
  • Sway resistant mounts to provide seismic attachment points for X, Y and Z axis mounting
  • ASME Tank Construction

Model Number Designation HE/HSE



Step 1
Base Model
Number:

HE = Single Phase Heater
HSE = Three Phase Heater

Step 2
Storage Capacity:
20 or 30 Gallons
-
Step 3
KW Rating:
1 Phase
1.5, 2, 3, 4, 4.5, 5, 6
3 Phase
2.5, 3, 4, 5, 8, 10, 12
Step 4
Tank:
SL = Hydrastone
Cement Lined Tank
Step 5
Voltage/Phase/Hz:
A = 120-1-60
RS = 208-1-60
R = 208-3-60
S = 240-1-60
T = 240-3-60
W = 277-1-60
T3 = 380-3-50/60
T7 = 415-3-50/60
T5 = 440-3-60
T4 = 480-3-60
T4S = 480-1-60
T6 = 600-3-60

Example:

HE20-4.5SLS

A horizontal ceiling hung HE model with 20 gallons storage and a 4.5 KW heating element in a cement lined tank rated for 240V, 1 phase power.

Model HE/HSE Specific Questions

Is a drain pan/drip tray needed for a ceiling hung water heater?

Yes. Without exception. The pan must also be connected to a suitable drain so water is properly routed to a drain.

What temperature should I set my water heater?

For typical domestic potable hot water service the temperature of your water heater at 125°F is sufficient. This prevents wasted energy (which means cost savings for you) and also decreases the possibility of scalding water burns. If you run out of hot water on this setting, increase the temperature by five degrees incrementally until your hot water needs are met. The goal is to have the temperature set just high enough to meet your needs but within safe operating parameters. Please note that a water heater in and of itself should not be relied upon as the ultimate temperature controlling source for the hot water delivered to your fixtures. Please consult local and state codes for installation of the proper and code approved (ASSE 1016, 1070, 1017) mixing devices to achieve the safe delivery of hot water to the fixtures. For a more complete information please download the whitepaper PDF titled "Understanding Potential Water Heater Scald Hazards" developed by ASSE at the following link ASSE Whitepaper

Why is Hydrastone Cement a better choice over glass lining?

Cement lining provides guaranteed 100% coverage with a minimum thickness of 0.5” over all internal tank surfaces. In comparison, glass lining is approximately 0.005” thick and includes imperfections, pinholes and variation in coverage thickness resulting in portions of unprotected steel tank exposed to corrosion. In an attempt to compensate, glass lined tanks include a sacrificial anode in an effort to slow down the corrosion of the tank. Cement lined tanks on the other hand do not require an anode due to the integrity of the lining. As such, a cement lined tank will far outlast a glass lined tank. For a more complete explanation of the benefits of the Hubbell cement lining please click on the following link Cement Lining

Which is better for me, a tankless or storage type water heater?

It depends. A tankless water heater is sometimes referred to as a Point-of-Use (POU) or instantaneous water heater. Due to the relative small physical size of a tankless water heater compared to a storage tank water heater, a tankless option can be advantageous from a space saving perspective and can sometimes be installed closer to where you want hot water (hence the term POU). However, tankless heaters are not suited for many applications, so it is critical that before choosing to go tankless you have carefully considered all of the factors that sometimes make the tankless option more complicated and risky compared to a storage type water heater. In particular, you should understand the operational characteristics, maintenance requirements, reparability, and sometimes significant installation requirements of a tankless water heater before making a decision. Tankless units do not store heated water like a storage type water heater; they only heat water as there is demand and therefore must be sized to meet the maximum flow for the application. In some cases a tankless water heater may improve operating efficiency, but possibly at the expense of user comfort. Hubbell tankless water heaters are available in Electric Tankless or Gas Tankless

What is the average life of an electric water heater?

The most important factor related to the life expectancy of a water heater is the quality and type of storage tank. On an average the life expectancy of a glass lined electric water heater is about 10-12 years (according to the National Association of Home Builders 2007 Study of Life Expectancy of Home Components http://www.nahb.org/fileUpload_details.aspx?contentID=99359 ), compared to a cement lined electric water heater’s average life expectancy of 23-26 years (Independent study of over 25,000 installations for an Electric Utility). Of course, there are various other factors that affect longevity including pressure fluctuations, usage, water conditions, environmental conditions, etc.

General Questions

Where can I purchase a Hubbell water heater?

There are numerous ways to purchase a Hubbell water heater depending upon the model you desire and your geographic location. The easiest way is to contact Hubbell directly at 800-647-3165 and ask for the sales department where you will be directed to either our local representative or our order entry department for quick and easy ordering.

Where can I purchase replacement parts?

Parts are available for your Hubbell water heater direct from the factory. Please call 800-647-3165 and ask for our parts department. Please have your model and serial number handy.

I don't see the size or feature I need, what do I do?

Hubbell has more than 35 product families available in over 4,000,000 configurations. There are numerous features, configurations and ratings we provide but for practical reasons are are not listed in the sales brochure. If you have a specific requirement and you do not see it in the brochure, please contact a Hubbell Sales Engineer...chances are we have what you need.

What should I know about Legionella disease?

Legionella is the bacteria responsible for Legionnaire’s Disease, an acute bacterial infection of the lower respiratory tract. This bacterium was first identified in 1977 by the Centers for Disease Control as the cause of an outbreak of pneumonia that caused 34 deaths at a 1976 American Legion Convention in Philadelphia. Pontiac Fever is a less severe, non-pneumonia, flu-like disease that is associated with and likely caused by Legionella bacteria. Legionella is a fairly common water bacterium and has been found to exist widely in many surface water sources including lakes, rivers, streams and ponds. It can also be found in ground water sources and some soils. At the levels found in these naturally occurring sources it typically does not pose a threat to public health. When the bacterium enters a domestic water system it can find an ideal host environment of warm water temperatures (105-115°F), stagnant water areas (isolated storage tanks and dead-end piping legs) and ample food sources (sediment, scale, deposits and biofilm). Under these conditions Legionella can rapidly colonize, forming higher concentrations that can pose the public health threat of Legionnaire’s Disease. There are many methods of controlling colonization of Legionella bacteria. However, a widely accepted and preferred method is to maintain the hot water system storage temperature continually at or above 140°F. Unfortunately, the elevated temperature necessary to minimize the growth of and kill Legionella bacteria has the potential to cause serious thermal shock and scalding injuries. As such, many plumbing engineers will specify that the water heater be set to maintain water temperatures at 140°F or higher to reduce the risk of Legionella, but then specify the appropriate mixing valve to ensure safe delivery of hot water to the fixtures. For a more thorough discussion of Legionella please go to here and the following link to the US Department of Labor OSHA information regarding Legionnaires’ Disease OSHA here

My question is not found in these FAQ’s, where do I look next?

Check out the Hubbell Product Center at Here for a complete listing of all technical documentation available by model. Get easy access to Installation, Operation & Maintenance manuals, Sales Brochures, Service Bulletins, Wiring Schematics, Parts Breakdowns and various other technical documents related to the full line of Hubbell water heaters. Or, if you prefer, please call us at 800-647-3165 and ask to speak to a Sales Engineer.

Downloads

Many of our products literature is available online for download. To open these files, a PDF viewer is required. If you do not have one, Adobe provides Acrobat Reader free of charge for viewing only. Use this link to download Acrobat Reader. You may also choose to download the file to your PC for future reference or printing. On most operating systems, simply right-click on the links below, choose "Save target as..." or "Save link as...", choose a location and it will save the document to your computer for future reference.

Model HE/HSE Specific Questions

My question is not found in these FAQ’s, where do I look next?

Check out the Hubbell Product Center at Here for a complete listing of all technical documentation available by model. Get easy access to Installation, Operation & Maintenance manuals, Sales Brochures, Service Bulletins, Wiring Schematics, Parts Breakdowns and various other technical documents related to the full line of Hubbell water heaters. Or, if you prefer, please call us at 800-647-3165 and ask to speak to a Sales Engineer.

Where can I purchase replacement parts?

Parts are available for your Hubbell water heater direct from the factory. Please call 800-647-3165 and ask for our parts department. Please have your model and serial number handy.


For Further Assistance Please Contact a Hubbell Tech Support Rep.

Sam Wellington
samw@hubbellheaters.com
203-378-2659 x136
D.J. Dineson
djdineson@hubbellheaters.com
203-378-2659 x125
Hubbell Heaters
45 Seymour Street
P.O. Box 288
Stratford, CT 06615-0288
Tel: 203-378-2659
Fax: 203-378-3593
Product Center
Hubbell Binder

View our current digital materials available in our resource center.

To Product Center  Bullet Point